Single Shot Tip Sizes / Orifice Size (Inches) | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Fan Width | .007 | .009 | .011 | .013 | .015 | .017 | .019 | .021 | .023 | .025 | .027 | .029 | .031 | .033 | .035 | .039 |
2″ – 4″ | 107 | 109 | 111 | 113 | 115 | 117 | ||||||||||
4″ – 6″ | 207 | 209 | 211 | 213 | 215 | 217 | 219 | 221 | 223 | 225 | ||||||
6″ – 8″ | 37 | 309 | 311 | 313 | 315 | 317 | 319 | 321 | 323 | 325 | ||||||
8″ – 10″ | 407 | 409 | 411 | 413 | 415 | 417 | 419 | 421 | 423 | 425 | 427 | 431 | 433 | |||
10″ – 12″ | 509 | 511 | 513 | 515 | 517 | 519 | 521 | 523 | 525 | 527 | 529 | 531 | 533 | 535 | 539 | |
12″ – 14″ | 609 | 611 | 613 | 615 | 617 | 619 | 621 | 623 | 625 | 627 | 629 | 631 | 633 | 635 | ||
14″ – 16″ | 715 | 717 | 719 | 721 | 723 | 725 | 735 | |||||||||
16″ – 18″ | 815 | 817 | 819 | 821 | 823 | 835 |
Airless Spray Tip Chart | ||
---|---|---|
Coating | Viscosity | Orifice Range |
Varnishes | Light | .009 – .011 |
Lacquer Finishes (clear) | .009 – .011 | |
Sanding Sealers | .009 – .011 | |
Shellac (clear) | .009 – .013 | |
Transparent Stain | .009 – .013 | |
Water Sealers (clear) | .009 – .013 | |
Solid Stains | Medium | .013 – .015 |
Exterior House Paints | .013 – .017 | |
Interior Wall Paints | .013 – .017 | |
Interior & Exterior Primers | .017 – .019 | |
Commercial Grade | Heavy | .017 – .019 |
Architectural Coatings | .017 – .019 | |
Interior Wall Paints | .017 – .019 | |
Interior Wall Primers | .017 – .019 | |
Dry Fall (quick dry) | .019 – .023 | |
One Coat, Primer-Finish Paints | .019 – .023 | |
Elastomerics | Extra Heavy | .021 – .031 |
Pigmented Waterproofers | .021 – .027 | |
Block Filler | .021 – .027 |
How to Determine Tip Size
Eg:
#5 = 1/2″ Fan Width based on Spray distance of 12” (300mm) or 2 X 5 = 10” Fan Width

#17 Orifice is diameter of opening in thousandths of an inch
Airless spray tips are essential to the proper operation of an airless spray system. They set the spray pattern control of the flow of material being sprayed and will control amount of flow material. It is important to remember that the orifice size, in combination ith fan-width size, decides the spray characteristics of the tip.
Tungsten Carbide Tip insert is made and machined in USA.