Certified Coated Metal Plate & Polystyrene Blocks

Certified coated-metal-plates1-170x170Ideal for Verifying Accuracy & Operation of Coating Thickness Gauges

Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.


  • Certified coated-metal-plate2-V3-170x170Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness guage
  • Ideal for use in the calibration lab, in the field or on the factory floor
  • Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
  • Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
  • Individually serialized for traceability to NIST or PTB – includes a Certificate of Calibration
  • Certified and labeled in both Metric and Imperial units

Certified coated-metal-plate3-170x170Specifications

Plate Diameter: 38mm (1.5″)
Measurement Diameter: 25mm (1″)
Polystyrene Blocks: 38 x 70mm (1.5″ x 2.75″)
Order
Code
Ideal for Approximate Thickness Coating/
Substrate
Accuracy
Plate
1
Plate
2
Plate
3
Plate
4
S1 PosiTector 6000 F, FS, FRS, FN, FNS, FNRS
PosiTest F&FM
0 75 μm
3 mils
250 μm
10 mils
1500 μm
(60 mils)
Epoxy on Steel (Ferrous) +/- 0.43 μm
+/- 0.017 mil
S2 PosiTector 6000 FOS, F45S, F90S
PosiTest DFT Ferrous & Combo
0 75 μm
3 mils
250 μm
10 mils
1000 μm
(40 mils)
S3 PosiTest G & GM
Posipen A, B & C
0 15 μm
0.6 mils
40 μm
1.6 mils
100 μm
(4 mils)
A1 PosiTector 6000 N, NS, NRS, FN, FNS, FNRS 0 75 μm
3 mils
250 μm
(10 mils)
1500 μm
60 mils
Epoxy on Steel (Non-Ferrous) +/- 0.43 μm
+/- 0.017 mil
A2 PosiTector 6000 NAS, NOS, N45S, N90S
PosiTest DFT Combo
0 75 μm
3 mils
250 μm
(10 mils)
500 μm
20 mils
A3 PosiTector 100B, 200, 200B 75 μm
3 mils
125 μm
5 mils
250 μm
(10 mils)
500 μm
20 mils
P1 PosiTector 6000 FT, FTS, NTS, FNTS 375 μm
15 mils
2 mm
80 mils
4.5 mm
8 mils
6.5 mm
250 mils
Polystrene Blocks (=) +/- (2.5 μm + 0.05% of thickness)
+/- (0.1 mil + 0.05% of thickness)
P2 PosiTector 6000 FHS, NHS, EOC 2.5 μm
100 mils
6.5 mm
205 mils
13 mm
500 mils
19 mm
750 mils
P3 PosiTector 100C 375 μm
15 mils
1.5 mm
60 mils
2.5 mm
100 mils
4.5 mm
185 mils
P4 PosiTector 100D 1.5 μm
60 mils
2.5 mm
100 mils
4.5 mm
185 mils
6.5 mm
185 mils
P5 PosiTector 6000 FKS, NKS 1.5 μm
60 mils
2.5 mm
100 mils
6.5 mm
250 mils
12 mm
480 mils
P6 PosiTector 200C 375 μm
15 mils
1.5 mm
30 mils
2.5 mm
100 mils
3 mm
125 mils