SPRAYING PUMP-PACKAGE SYSTEM for  Passive Fire-Proof (PFP) Material

ESCS (U.K.) works very closely with various major epoxy Passive Fire-Proof (PFP) Material Manufacturers to develop their range of PFP Airless Spray Equipment since 2012. All ESCS Equipment has Full Approval and Certification from major PFP-Material Manufacturers.

Clink to download/view ESCS Certifications

• ES-430 FR PFP Plural Unit Approval for spraying Chartek PFP Material
• ES-430 FR PFP Plural Unit Approval for spraying Jotachar PFP Material 
• ES-430 FR PFP Plural Unit Approval PPG for spraying Pit-Char-XP PFP Material

Model : ES 430 FR

Model ES-430 is a cart or skid mounted heated airless spray system suitable for the application of All Major Solvent Free Plural Component Intumescent Fireproofing Epoxies (PFP). The ES-430 system is a compact unit built around to supply a complete proportioning system for the accurate mixing and application of PFP materials. Its user-friendly and compact design makes it ideal to medium and large sized application. The system features a meter pump and a large capacity air motor that is capable of spraying at high pressure and material delivery rates up to 12 litres/min. ES-430 can be equipped with hose bundles up to 90m in length.

Technical Specification

Mixing Ratio	Pressure Ratio	Pump Designation	Volume per Cycle (litres)	Delivery at 10 Cycles (l/min)	Delivery at 20 Cycles (l/min)
2.33:1	67.8:1	T180-T155-T180	0.514	5.14	10.28
2:1	64.6:1	T180-T180-180	0.539	5.39	10.779
1:1	75:1	T232-T232	0.464	4640	9.29

Different pump configurations are available if required to give other ratios and output rates. Metering Pump Lowers are easily changed. (However this will slightly alter the delivery and pressure rates on the table above.)

Key Benefits

– low wastage on mixed materials

– low operating pressure with high delivery output

– improve mixing and application quality

– reduce maintenance cost due to longer operation duration

 

ES-430 FR PFP Atex System

The above unit can also be designed to the same specification and standard as the ES430; however this system has a fully certified Atex Approval to  II 2 G c T4 to directive 94/9/EC. ES-430 FR PFP Atex System comply with Essential Health & Safety requirements relating to the design and construction of equipment and protective systems intended for the use in potentially explosive atmospheres given in Annex II to the Directive 94/9/EC of 23^rd March 1994.

• Specialised Training : Refer to our “Training“

• Maintenance and Servicing : Refer to our “Services“

• On Site Assistance : Refer to our “Services“